Rogwel Kerman Factory

Intro

The Kerman Factory is a high level area that has at least L56 mobs in it.

You can access the Kerman Factory/Chiron Habitat area by Steam Ballooning from Deeren.

You have to complete a quest to get access to the Kerman Factory.
There are additional Kerman Factory related quests available.

Each floor of the Kerman Factory requires a key to unlock a Toolbox.
Each locked Toolbox contains an item to access the next floor.
Keys will stack in inventory so you can farm keys for future access.
Shadow walkers and Assassins may be able to use Purloin to unlock the Toolboxes.

Lv 50 - Factory Entrance Qualification

[55Lv] Condition to enter Factory
1. Talk to Conrad in Deeren
2. Collect 10 Chiron's Leather from any Chirons at Chiron Habitat
3. Kill L54 Ral Chiron
==> located around 10821/25317 in Chiron Habitat
==> look for a ruined building/structure, Ral is NW of that
4. Talk to Conrad
REWARDS: Metal Scale Leather x58, 43750 gold, 1180800xp

Entering the Kerman Factory

Factory Entrance is in NW corner of Chiron Nest
Talk to Staff Henry to enter

Tunnel 1st Floor

L57 Hellhounds

There will be two L56 Archt Guards
Click on the Tool Box to get the Hatch Gear of Tunnel 1F
Click on arrow to get to 2nd Floor

Tunnel 2nd Floor - Processing Equipment

L57 Reinforced Steam Maul

Go east and go up the stairs to upper level
The stairs to lower level north are at NW corner of upper level
Kill L57 Reinforced Steam Mauls to loot Key of Tool Box in Tunnel
Go back down to lower level and use key on Tool Box
Use Hatch Gear of Tunnel 2F on Hatch to go to 3rd floor

Tunnel 3rd Floor - Purifier Entrance

L56 Archt Guard
L60 Archt Keeper Leader
L99 Bombs

There are two L56 Archt Guards
Avoid the L99 Bombs
At the north end of the tunnel are two more Archt Guards and L60 Archt Keeper Leader
Kill the Leader to use hatch to 4th floor

Tunnel 4th Floor Purifier

L56 Archt Guards
L57 Hell Sauron

Toolbox, 2 L56 Archt Guards in each corner
Need key from Hell Sauron to unlock Toolbox
Found key in NE Toolbox
Hatch is in center, 4 L56 Archt Guards around Hatch

Factory 1st Floor Material Warehouse

L58 Hell Terrier
L59 Archt Berserker
L60 Goods Carrier

Need Hatch Pipe, Hatch Gear, Hatch Screw, Hatch Welder of Factory 1F

NW = Pipe
SW = Screw
NE = Gear
SE = Torch/Welder

Factory 2nd Floor Hangar Entrance

L58 Factory Chiron
2 L56 Archt Guards by hatch

Use the four switches
When all the switches are gone, you can enter the hatch

Factory 3rd Floor Hangar Center

L58 Hell Terrier
L59 Archt Berserker
L59 Black Core
L60 Goods Carrier
L60 Archt Tamer

There are four Hangars.

The Hatch to the next floor is in the NW Hangar or C-1 Hangar.
The hatch in the other hangars lead to the Twin Keeper. The Twin Keeper has to be killed to move to the 4th floor.

Only one hatch is open at a time. If you try to open the hatch in the C-1 hangar and that hatch is closed you have to try the hatches in the other hangars. If the open hatch is in the C-3 hangar, the next open hatch is in the C-4 hangar. After C-4, the next hatch will be open in C-1.

This means that if you can't enter the C-1 hatch, enter the next open hatch. Instead of trying to kill the Twin Keeper, use your pet to Town Portal. Return to the factory and get back to the hangar. Continue to open hatches until you can go through the C-1 hatch.

Factory 4th Flor Chiron Nest

L57 Hell Hound
L58 Hell Terrier

The Hatch is on the lower floor and does not require anything special to use.

There is also a machine here that is used to summon a boss monster.

Factory Manufacturing Line

The 5th, 6th and 7th floors are linked together.

There are quests here to get a Hatch Key and a 7F/Lab Key.

Need 5F, 6F, 7F Certificates and Mass Produced Robot Core to make Hatch Key

The Mass Produced Robot Core drops from L61 Mass Produced Robots.

The certificates drop from Managers on each floor.
The L61 Manufacturing Managers are located in the central pits on each floor.

The 7F/Lab Key needs drops from the L62 Engineers on each floor:
Engineer Richell on 5F
Engineer Gluiso on 6F
Engineer Splite on 7F

You need the Hatch key to access the rooms with the Engineers.

The 7F/Lab Key replaces the Hatch key and allows access to the Lab.

The Factory key, that allows you to go directly to the 5th floor, drops from Maestro Kal Repon.

L62 Archt Guards
L61 Products Carrier
L61 Mass Produced
L61 Maintenance Robot (does not agg)
L61 Manufacturing Facility Observation Core (does not agg)

Factory 5th Floor Manufacturing Line

You can go back to the Chiron Nest through the west hatch.
The east hatch goes to the 6th Floor Manufacturing Line.

5F Robo-Rx2 Proto Type is by the west hatch.
Talk to Robo Rx to learn about the Hatch Key and the 7F/Lab key.

The central pit has ramps on the west and east sides.
The 5F Manufacturing Manager can be found at the bottom of the central pit.

To the SW is the 5th Floor Control Room.
A material box can be found in this room.
The material box contains a Steam-Rider Control part.

To the SE is the 5th Floor Management Room.
A L65 Tamed Archt can be found in this room.

There is a hatch in the Mangement Room.
You need the Hatch Key to enter the hatch.
The hatch leads to the Factory Waste Water Disposal Pipe.

In the pipe are some L61 Haxter and a L62 Chernobyl Haxter.
You will also take continuous poison damage while in the pipe.
The other end of the pipe leads to the 5th Floor Lounge.

In the 5th Floor Lounge can be found L62 Engineer Richell.
Richell has to be killed to get the Lab key.

Factory 6th Floor Manufacturing Line

You can go back to the 5th Floor through the west hatch.
The east hatch goes to the 7th Floor Manufacturing Line.

The central pit has ramps on the west and east sides.
The 6F Manufacturing Manager can be found at the bottom of the central pit.

At the SE corner of 6F is the 6th Floor Management Room.

To the NW is the 6th Floor Lounge.
There is a hatch in the 6F Lounge that leads to the Factory Waste Water Disposal Pipe.
Run past the L61 Haxters and L62 Chernobyl Haxters.
The other end of the pipe goes to the 6th Floor Control Room.

L62 Engineer Splite is in the Control Room with L62 Archt Guards.
Kill Splite to get part of the 7F/Lab key.

Factory 7th Floor Manufacturing Line

You can go back to the 6th Floor through the west hatch.
The east hatch goes to the Lab.

The central pit has ramps on the north and south sides.
The 7F Manufacturing Manager can be found at the bottom of the central pit.

The 7th Floor Management Room is to the SE.
There is a hatch in this room that doesn't appear to go anywhere.

The 7th Floor Lounge is to the NW.
The hatch here goes from a disposal pipe into the 6th Floor Control Room.
This is a different control room than the one on the 6th Floor.
Engineer Splite can be found here for another part of the 7F/Lab key.

The 7th Floor Control Room is located to the SW.
The hatch here goes to the 7th Floor Machine Room.

Here can be found 7F Robo-Rx2 Proto-Type.
Talk to Robo-Rx2 to get the 7F/Lab key.
Needs Hatch Key, A/B/C parts from Engineers
Lab Key also opens hatches

Factory Manufacturing Machine
Maestro Earring
1) 10 pieces Reinforcing Alloy + 10 pieces Reinforcing Crystal
loot from treasure boxes in factory

Maestro Ring
1) 1 piece of tooth from Hell Keeper
2) 1 piece of Phoenix carcass from Phoenix
3) 1 piece of Maestro's tool from Maestro Kal Repon

Steam Rider
1) 2 steam-rider running parts
2) 2 steam-rider control parts
loot from hidden material boxes in factory

Lab?

8th Floor?

Unless otherwise stated, the content of this page is licensed under Creative Commons Attribution-NonCommercial-ShareAlike 3.0 License